Recommendations

SUGESTIONS FOR FIXING AND CLEANING THE PRODUCTS

PVC

  1. Line up the trim on the corner ensuring that the gluing material is passing through the punches of the profile.
  2. Next push the tiles firmly on the punched side of the profile for a perfect result.
  3. Once is done, clean properly the profile of the left over gluing material.
  4. Most of the cleaning products will not damage the PVC of the plain colour range. Nevertheless, the cleaning of the marble effects profiles is more delicate and we recommend only the use of a soft sponge and water.

ALUMINIUM

  1. Line up the trim on the corner ensuring that the gluing material is passing through the punches of the profile.
  2. Next push the tiles firmly on the punched side of the profile for a perfect result.
  3. Once is done, clean immediately the profile of the left over gluing material in order to avoid rust spots and external changes, since aluminium is sensitive to the alkaline components of the gluing materials.
  4. We recommended only the use of a neutral soap and soft sponge.

STAINLESS STEEL

  1. Line up the trim on the corner ensuring that the gluing material is passing through the punches of the profile.
  2. Next push the tiles firmly on the punched side of the profile for a perfect result.
  3. It is very important that once the installation is finished to clean immediately the profile to avoid possible rust spots and changes of the external look.
  4. We recommended only the use of a neutral soap and soft sponge.