echo

crc32

Last updated: Fri, 20 May 2011

crypt

(PHP 4, PHP 5)

crypt — One-way string hashing

Descripción

string crypt ( string $str [, string $salt ] )

crypt() will return a hashed string using the standard Unix DES-based algorithm or alternative algorithms that may be available on the system.

Some operating systems support more than one type of hash. In fact, sometimes the standard DES-based algorithm is replaced by an MD5-based algorithm. The hash type is triggered by the salt argument. Prior to 5.3, PHP would determine the available algorithms at install-time based on the system's crypt(). If no salt is provided, PHP will auto-generate either a standard two character (DES) salt, or a twelve character (MD5), depending on the availability of MD5 crypt(). PHP sets a constant named CRYPT_SALT_LENGTH which indicates the longest valid salt allowed by the available hashes.

The standard DES-based crypt() returns the salt as the first two characters of the output. It also only uses the first eight characters of str, so longer strings that start with the same eight characters will generate the same result (when the same salt is used).

On systems where the crypt() function supports multiple hash types, the following constants are set to 0 or 1 depending on whether the given type is available:

CRYPT_STD_DES - Standard DES-based hash with a two character salt from the alphabet "./0-9A-Za-z". Using invalid characters in the salt will cause crypt() to fail.
CRYPT_EXT_DES - Extended DES-based hash. The "salt" is a 9-character string consisting of an underscore followed by 4 bytes of iteration count and 4 bytes of salt. These are encoded as printable characters, 6 bits per character, least significant character first. The values 0 to 63 are encoded as "./0-9A-Za-z". Using invalid characters in the salt will cause crypt() to fail.
CRYPT_MD5 - MD5 hashing with a twelve character salt starting with $1$
CRYPT_BLOWFISH - Blowfish hashing with a salt as follows: "$2a$", a two digit cost parameter, "$", and 22 base64 digits from the alphabet "./0-9A-Za-z". Using characters outside of this range in the salt will cause crypt() to return a zero-length string. The two digit cost parameter is the base-2 logarithm of the iteration count for the underlying Blowfish-based hashing algorithmeter and must be in range 04-31, values outside this range will cause crypt() to fail.
CRYPT_SHA256 - SHA-256 hash with a sixteen character salt prefixed with $5$. If the salt string starts with 'rounds=<N>$', the numeric value of N is used to indicate how many times the hashing loop should be executed, much like the cost parameter on Blowfish. The default number of rounds is 5000, there is a minimum of 1000 and a maximum of 999,999,999. Any selection of N outside this range will be truncated to the nearest limit.
CRYPT_SHA512 - SHA-512 hash with a sixteen character salt prefixed with $6$. If the salt string starts with 'rounds=<N>$', the numeric value of N is used to indicate how many times the hashing loop should be executed, much like the cost parameter on Blowfish. The default number of rounds is 5000, there is a minimum of 1000 and a maximum of 999,999,999. Any selection of N outside this range will be truncated to the nearest limit.

Note:
As of PHP 5.3.0, PHP contains its own implementation and will use that if the system lacks of support for one or more of the algorithms.

Parámetros

str: The string to be hashed.
salt: An optional salt string to base the hashing on. If not provided, the behaviour is defined by the algorithm implementation and can lead to unexpected results.

Valores devueltos

Returns the hashed string or a string that is shorter than 13 characters and is guaranteed to differ from the salt on failure.

Historial de cambios

Versión	Descripción
5.3.2	Added SHA-256 and SHA-512 crypt based on Ulrich Drepper's » implementation.
5.3.2	Fixed Blowfish behaviour on invalid rounds to return "failure" string ("0" or "1"), instead of falling back to DES.
5.3.0	PHP now contains its own implementation for the MD5 crypt, Standard DES, Extended DES and the Blowfish algorithms and will use that if the system lacks of support for one or more of the algorithms.

Ejemplos

Example #1 crypt() examples


<?php
$password = crypt('mypassword'); // let the salt be automatically generated

/* You should pass the entire results of crypt() as the salt for comparing a
   password, to avoid problems when different hashing algorithms are used. (As
   it says above, standard DES-based password hashing uses a 2-character salt,
   but MD5-based hashing uses 12.) */
if (crypt($user_input, $password) == $password) {
   echo "Password verified!";
}
?>

Example #2 Using crypt() with htpasswd


<?php
// Set the password
$password = 'mypassword';

// Get the hash, letting the salt be automatically generated
$hash = crypt($password);
?>

Example #3 Using crypt() with different hash types


<?php
if (CRYPT_STD_DES == 1) {
    echo 'Standard DES: ' . crypt('rasmuslerdorf', 'rl') . "\n";
}

if (CRYPT_EXT_DES == 1) {
    echo 'Extended DES: ' . crypt('rasmuslerdorf', '_J9..rasm') . "\n";
}

if (CRYPT_MD5 == 1) {
    echo 'MD5:          ' . crypt('rasmuslerdorf', '$1$rasmusle$') . "\n";
}

if (CRYPT_BLOWFISH == 1) {
    echo 'Blowfish:     ' . crypt('rasmuslerdorf', '$2a$07$usesomesillystringforsalt$') . "\n";
}

if (CRYPT_SHA256 == 1) {
    echo 'SHA-256:      ' . crypt('rasmuslerdorf', '$5$rounds=5000$usesomesillystringforsalt$') . "\n";
}

if (CRYPT_SHA512 == 1) {
    echo 'SHA-512:      ' . crypt('rasmuslerdorf', '$6$rounds=5000$usesomesillystringforsalt$') . "\n";
}
?>

El resultado del ejemplo sería algo similar a:

Standard DES: rl.3StKT.4T8M
Extended DES: _J9..rasmBYk8r9AiWNc
MD5:          $1$rasmusle$rISCgZzpwk3UhDidwXvin0
Blowfish:     $2a$07$usesomesillystringfore2uDLvp1Ii2e./U9C8sBjqp8I90dH6hi
SHA-256:      $5$rounds=5000$usesomesillystri$KqJWpanXZHKq2BOB43TSaYhEWsQ1Lr5QNyPCDH/Tp.6
SHA-512:      $6$rounds=5000$usesomesillystri$D4IrlXatmP7rx3P3InaxBeoomnAihCKRVQP22JZ6EY47Wc6BkroIuUUBOov1i.S5KPgErtP/EN5mcO.ChWQW21

Notas

Note: There is no decrypt function, since crypt() uses a one-way algorithm.

Ver también

md5() - Calcula el hash md5 de un string
The Mcrypt extension
The Unix man page for your crypt function for more information

echo

crc32

Last updated: Fri, 20 May 2011

add a note User Contributed Notes crypt

kaminski at istori dot com 05-Feb-2011 11:43


Here is an expression to generate pseudorandom salt for the CRYPT_BLOWFISH hash type:



<?php $salt = substr(str_replace('+', '.', base64_encode(pack('N4', mt_rand(), mt_rand(), mt_rand(), mt_rand()))), 0, 22); ?>



It is intended for use on systems where mt_getrandmax() == 2147483647.



The salt created will be 128 bits in length, padded to 132 bits and then expressed in 22 base64 characters.  (CRYPT_BLOWFISH only uses 128 bits for the salt, even though there are 132 bits in 22 base64 characters.  If you examine the CRYPT_BLOWFISH input and output, you can see that it ignores the last four bits on input, and sets them to zero on output.)



Note that the high-order bits of the four 32-bit dwords returned by mt_rand() will always be zero (since mt_getrandmax == 2^31), so only 124 of the 128 bits will be pseudorandom.  I found that acceptable for my application.

Robin Leffmann 25-Dec-2010 02:23


The salts for crypt() must follow the usual base64 ASCII pattern (./0-9A-Za-z only), but the payload string can contain any binary data.

Thomas Praxl 10-Jan-2010 05:28


Note that crypt can cause hangs on Windows OS when used with a salt. This applies only to certain circumstances.

php at nospam dot nowhere dot com 27-Aug-2009 02:21


The makesalt() function code below when used to create an MD5 salt, produces a salt with characters not typically in a salt used by operating system crypt functions.  Some of these characters may have unintended side effects depending on how they are used - including the following: @ ` ~ \ | {}.



I am using the following to create MD5-Crypt hashes, (yes, I am assuming CRYPT_MD5 support is present).



<?php

function md5crypt($password){

    // create a salt that ensures crypt creates an md5 hash

    $base64_alphabet='ABCDEFGHIJKLMNOPQRSTUVWXYZ'

                    .'abcdefghijklmnopqrstuvwxyz0123456789+/';

    $salt='$1$';

    for($i=0; $i<9; $i++){

        $salt.=$base64_alphabet[rand(0,63)];

    }

    // return the crypt md5 password

    return crypt($password,$salt.'$');

}

?>

sdc 17-Jul-2007 03:49


ECB is one of the least secure block cipher modes (Wikipedia has some good information about these: http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation) because it is the only mode, out of the one's available for use with MCRYPT, that does not actually use the IV provided. Note: PHP will emit an E_WARNING if the IV is missing or if its length is not equal to the size mandated by mcrypt_get_iv_size().



In response to <addiakogiannis at isds dot gr>, even though the IV is randomly generated in the encryption and decryption functions, the output remains the same given the same plaintext and key because the mode is ECB. If a different mode is used, the IV must be preserved (say, by concatenation with the ciphertext) in order for the ciphertext to be decrypted properly. That is:



<?php



//changing all instances of MCRYPT_MODE_ECB to MCRYPT_MODE_CFB



function RIJNDAEL_encrypt($text){



    $iv_size = mcrypt_get_iv_size(MCRYPT_RIJNDAEL_256, MCRYPT_MODE_CFB);

    $iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);

    $key = "This is a very secret key";

    return base64_encode(mcrypt_encrypt(MCRYPT_RIJNDAEL_256, $key, $text, MCRYPT_MODE_CFB, $iv));

   

}



function RIJNDAEL_decrypt($text){



    $iv_size = mcrypt_get_iv_size(MCRYPT_RIJNDAEL_256, MCRYPT_MODE_CFB);

    $iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);

    $key = "This is a very secret key";

  //I used trim to remove trailing spaces

return trim(mcrypt_decrypt(MCRYPT_RIJNDAEL_256, $key, base64_decode($text), MCRYPT_MODE_CFB, $iv));

   

}



//example

echo RIJNDAEL_decrypt(RIJNDAEL_encrypt('Her name was lola!'));



?>



...will output a random, 18-character string. Thus, the length of the plaintext is preserved, but the data is completely corrupted.

addiakogiannis at isds dot gr 13-Jul-2007 10:46


Two siple functions for encrypting and decrypting with RIJNDAEL 256



function RIJNDAEL_encrypt($text){



    $iv_size = mcrypt_get_iv_size(MCRYPT_RIJNDAEL_256, MCRYPT_MODE_ECB);

    $iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);

    $key = "This is a very secret key";

    return base64_encode(mcrypt_encrypt(MCRYPT_RIJNDAEL_256, $key, $text, MCRYPT_MODE_ECB, $iv));

    

}



function RIJNDAEL_decrypt($text){



    $iv_size = mcrypt_get_iv_size(MCRYPT_RIJNDAEL_256, MCRYPT_MODE_ECB);

    $iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);

    $key = "This is a very secret key";

  //I used trim to remove trailing spaces

return trim(mcrypt_decrypt(MCRYPT_RIJNDAEL_256, $key, base64_decode($text), MCRYPT_MODE_ECB, $iv));

    

}



//example

echo RIJNDAEL_decrypt(RIJNDAEL_encrypt('Her name was lola!'));

leth at nowhere dot not 06-Apr-2007 02:51


for me(on OpenBSD4.0+Apache 1.3(standard)+php4.3.10) blowfish seems to work if you do something like this:



    if (CRYPT_BLOWFISH == 1)

    {

        $salt="this should really be a long line of salt";

        $blowfish_salt = "\$2a\$07\$".substr($salt, 0, CRYPT_SALT_LENGTH);

        echo crypt($pass, $blowfish_salt);

    }



of course with $salt set as a good long salt.

Jou 06-Apr-2007 08:52


I found out that you can use php:s crypt function to change  the user/root password in Linux distributions (at least in Slackware).



You just have to change the encrypted password for the user in the /etc/shadow file with the output from crypt("newpassword");

mikey_nich (at) hotmáil . com 04-Mar-2007 03:47


Are you using Apache2 on f.i. WinXP and want to create .htpasswd files via php? Then you need to use the APR1-MD5 encryption method. Here is a function for that:



<?php



function crypt_apr1_md5($plainpasswd) {

    $salt = substr(str_shuffle("abcdefghijklmnopqrstuvwxyz0123456789"), 0, 8);

    $len = strlen($plainpasswd);

    $text = $plainpasswd.'$apr1$'.$salt;

    $bin = pack("H32", md5($plainpasswd.$salt.$plainpasswd));

    for($i = $len; $i > 0; $i -= 16) { $text .= substr($bin, 0, min(16, $i)); }

    for($i = $len; $i > 0; $i >>= 1) { $text .= ($i & 1) ? chr(0) : $plainpasswd{0}; }

    $bin = pack("H32", md5($text));

    for($i = 0; $i < 1000; $i++) {

        $new = ($i & 1) ? $plainpasswd : $bin;

        if ($i % 3) $new .= $salt;

        if ($i % 7) $new .= $plainpasswd;

        $new .= ($i & 1) ? $bin : $plainpasswd;

        $bin = pack("H32", md5($new));

    }

    for ($i = 0; $i < 5; $i++) {

        $k = $i + 6;

        $j = $i + 12;

        if ($j == 16) $j = 5;

        $tmp = $bin[$i].$bin[$k].$bin[$j].$tmp;

    }

    $tmp = chr(0).chr(0).$bin[11].$tmp;

    $tmp = strtr(strrev(substr(base64_encode($tmp), 2)),

    "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/",

    "./0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz");

    return "$"."apr1"."$".$salt."$".$tmp;

}



?>

tserong at sgi dot com 14-Dec-2006 08:18


Blowfish doesn't use a sixteen character salt, it uses sixteen *bytes* of salt.  So (courtesy of the docs for the Crypt::Eksblowfish::Bcrypt Perl module), it's:



    "$2", optional "a", "$", two digits, "$", and 22 base 64 digits



If the salt is not long enough, crypt will return "*0" and you will have no idea what is wrong.  Interestingly, the example in the documentation with a trailing '$' in the salt does not work.  Replace the '$' with a '.', and the output appears as advertised.

picolobo at pilab dot dyndns dot org 21-Sep-2006 08:49


I had problems with ENCRYPT MySQL function when i tried to compare with the encrypted password (with ENCRYPT).



Another solution i read from "UNIX Advanced programming" where i found about the UNIX system call "crypt()":



Password="tB" //The two first letters of encrypted password



SELECT password from users where Password=ENCRYPT('".$_POST['password']."',Password)



mysql> select password from users where password=encrypt('pasword','tB');

+---------------+

| password      |

+---------------+

| tBY8OVuabSiTU |

+---------------+

1 row in set (0.01 sec)



Bye.



> topace at lightbox dot org

> 22-Sep-2005 06:34

>

> To authenticate against a stored crypt in MySQL, simply use:

>

> SELECT ................

>           AND Password=ENCRYPT('".$_POST['password']."',Password)

solar at openwall dot com 24-Dec-2005 07:20


With different password hashing methods supported on different systems and with the need to generate salts with your own PHP code in order to use the more advanced / more secure methods, it takes special knowledge to use crypt() optimally, producing strong password hashes.  Other message digest / hashing functions supported by PHP, such as md5() and sha1(), are really no good for password hashing if used naively, resulting in hashes which may be brute-forced at rates much higher than those possible for hashes produced by crypt().



I have implemented a PHP password hashing framework (in PHP, tested with all of PHP 3, 4, and 5) which hides the complexity from your PHP applications (no need for you to worry about salts, etc.), yet does things in almost the best way possible given the constraints of the available functions.  The homepage for the framework is:



http://www.openwall.com/phpass/



I have placed this code in the public domain, so there are no copyrights or licensing restrictions to worry about.



P.S. I have 10 years of experience in password (in)security and I've developed several other password security tools and libraries.  So most people can feel confident they're getting this done better by using my framework than they could have done it on their own.

hotdog (at) gmx (dot) net 16-Nov-2005 03:34


WRONG:



$mypassword = "toto";

$smd5_pass = "{SMD5}......." // in openldap



if (preg_match ("/{SMD5}/i", $smd5_pass))

 {

  $encrypted = substr($md5_pass, 6);

  $hash = base64_decode($encrypted);

  $salt = substr($hash,16);

  $mhashed =  mhash(MHASH_MD5, $mypassword . $salt) ;

  $without_salt = explode($salt,$hash_hex);

   if ($without_salt[0] == $mhashed) {

    echo "Password verified <br>";

    } else {

    echo "Password Not verified<br>";

    }

 }



$without_salt = explode($salt,$hash_hex); should be $without_salt = explode($salt,$hash); 



RIGHT:



$mypassword = "toto";

$smd5_pass = "{SMD5}......." // in openldap



if (preg_match ("/{SMD5}/i", $smd5_pass))

 {

  $encrypted = substr($md5_pass, 6);

  $hash = base64_decode($encrypted);

  $salt = substr($hash,16);

  $mhashed =  mhash(MHASH_MD5, $mypassword . $salt) ;

  $without_salt = explode($salt,$hash);

   if ($without_salt[0] == $mhashed) {

    echo "Password verified <br>";

    } else {

    echo "Password Not verified<br>";

    }

 }

Vlad Alexa Mancini mancin at nextcode dot org 15-May-2005 08:57


cleaner version of shadow() and with more ascii chars



<?php



function shadow ($input){

         for ($n = 0; $n < 9; $n++){

              $s .= chr(rand(64,126));

         }

         $seed =  "$1$".$s."$";

         $return = crypt($input,$seed);

    return $return;

}



>

thorhajo at gmail dot com 02-Sep-2004 10:34


Here's a little function I wrote to generate MD5 password hashes in the format they're found in /etc/shadow:



function shadow($password)

{

  $hash = '';

  for($i=0;$i<8;$i++)

  {

    $j = mt_rand(0,53);

    if($j<26)$hash .= chr(rand(65,90));

    else if($j<52)$hash .= chr(rand(97,122));

    else if($j<53)$hash .= '.';

    else $hash .= '/';

  }

  return crypt($password,'$1$'.$hash.'$');

}



I've written this so that each character in the a-zA-Z./ set has a 1/54 of a chance of being selected (26 + 26 + 2 = 54), thus being statistically even.

aidan at php dot net 05-Jul-2004 02:52


Text_Password allows one to create pronounceable and unpronounceable passwords.



http://pear.php.net/package/text_password

add a note