Print Go back    
Technical data porcelain
60 x 60 cm. - 23.6 x 23.6 inches
 
Physical data Reference standard
Manufacture process Single-firing Dry pressed ceramic tile
UNE-EN 14411
Thickness 11 UNE EN ISO 10545 Part 2
Length, width, thickness, side straightness, orthogonality, flatness Conforms to the requisites applicable to each model as defined in standard UNE-EN 14411 for Group BI-a UNE EN ISO 10545 Part 2
Deviation from production size (W) < ± 0,6 % UNE EN ISO 10545 Part 2
Rectified < ± 0,2 % UNE EN ISO 10545 Part 2
Side straightness < ± 0,5 % UNE EN ISO 10545 Part 2
Orthogonality < ± 0,6 % UNE EN ISO 10545 Part 2
Curvature < ± 0,5 % UNE EN ISO 10545 Part 2
Thickness < ± 5 % UNE EN ISO 10545 Part 2
Water absorption E < 0,5 % UNE EN ISO 10545 Part 3
Flexion resistance N/sq. mm. and breaking strength > 35
> 1300		 UNE EN ISO 10545 Part 4
Resistance to deep abrasion (Unglazed tiles) < 140mm3 UNE EN ISO 10545 Part 6
Resistance to surface abrasion (Glazed tiles) To enquire according to de styles UNE EN ISO 10545 Part 7
Lineal thermic dilatation < 9 x 10-6 /º C UNE EN ISO 10545 Part 8
Thermic impact resistance It stands the test UNE EN ISO 10545 Part 9
Cracking resistance It stands the test UNE EN ISO 10545 Part 11
Frost resistance It stands the test UNE EN ISO 10545 Part 12
 
Chemical Features
Chemical resistance
*Domestic cleaning products
*Swimming pool salt
*Acids and bases (low concentration)
Type GA / UA
Type GA / UA
Minimum Type GLA / ULA
UNE EN ISO 10545 Part 13
Stains resistance
*Glazed tiles
*Unglazed tiles
Clase 5
Minimum Type 3		 UNE EN ISO 10545 Part 14

Integral

It is a metallic contour that can be used to complement as well as to enhace the joints of the listels and pieces employed when wall tiling. Since it is a metallic piece, its positioning should be carried out with special glues such as contact glues to stick non-porous surfaces. We recommend the use of epoxy resin, a two components glue, which produces a cold soldering unification, guarantees its right joinment and its maintenance on any other surface. An adequate radial must be used for cutting it fittingly.

The “INTEGRAL” listels embody two glue steel contours.

Trim

Please consult the Commercial Department for availability.

Complements of natural marble:

This natural origin product, could show in function from the source of the quarry, shade differences, different textures and even natural formed holes in the stone.

All these “natural imperfections” gives the product its own personality and unrepeatable characteristics.

Because of it we can’t accept any responsability for any claim based on these reasons (see above).

Series Mármoles-PR (Intense shine)

Due to the characteristics of this material (intense shine), we strongly advise you to use it as a wall covering only.

We cannot be held responsible for any defect arising from an inadequate use the material.

There is a matching floor tile for this serie: 30x30 Mármoles-SPR.